Module 1: High Pressure Pump and Motor AssemblyNote Take 6200 Baht Off the price for the SM-20 standard unit being 110v 60hz
One General Pump Comp...
Module 1: High Pressure Pump and Motor Assembly Note Take 6200 Baht Off the price for the SM-20 standard unit being 110v 60hz
One General Pump Company triplex plunger pump with a 316 stainless steel manifold and wetted parts, solid ceramic plungers and a nickel-plated crankcase for anti-corrosion mechanically coupled to a 1.0Hp 120/220VAC electric motor. Fitted with a pressure relief valve preset to 1000 PSI. Inlet and outlet fittings supplied and installed on pump.
Module 2: RO Pressure Vessel Assembly One filament wound fiberglass/epoxy pressure vessel. One SW30-2540 Dow Filmtec Polyamide thin-film composite high salt rejection RO Membrane (The Gold Standard in RO Membranes, not a discount off-brand) Two fiberglass clamps affixed to fiberglass mounting feet. One 3ft long 3/8? high pressure braided stainless steel silicone covered hose for connecting the high-pressure pump outlet to the RO pressure vessel. (Longer hose available upon request for an additional charge)
Module 3: Pre-filter and Boost Pump Assembly Two 10” clear filter housings with mounting brackets One 20-micron pre-filter element One 5-micron pre-filter element One self-priming 12V DC variable speed Jabsco boost pump (Also available in 120V AC and 24V DC for an additional 6200 Baht Charge)
Module 4: Valving and Cleaning Assembly Valving and Cleaning Assembly One clear filter housing with mounting bracket One activated carbon filter element Two 3-way valves for selecting modes of operation:
Normal operation of inlet seawater Fresh water flushing from ships tanks or pickling solution from 5-gallon bucket
Module 5: Remote Control Panel
(Not included with the SeaMaker Simple units -S) An anodized aluminum panel with the following system controls: One Hour Meter (Standard) One 0-1 GPM flow meter One 0-1500 system pressure gauge One product water selector non-blocking 3-way valve One stainless steel pressure regulating needle valve One 12V DC boost pump electrical switch One 120V/220V AC high pressure pump electrical switch One boost Pump pressure gauge (advise us re voltage when ordering) One 5ft 3/8? high pressure braided stainless steel silicon coated hose (Longer hose available upon request for an additional charge)
Module 5: Optional Remote-Control Panel with TDS Meter Replaces standard hour meter with on-panel real-time TDS meter display ($200/6200 Baht adder)
Miscellaneous Included Equipment & Supplies:
30ft of green 1/2? Polyethylene sea water tubing 30ft of blue 1/4? Polyethylene product water tubing 40ft of red 1/4? Polyethylene brine water tubing 10ft of Orange 3/8? Polyethylene pickling water tubing One cutter for the water tubing
Locking clips for all push connector fittings Electronic copy of the Installation, Operation and Maintenance manual via USB Stick (Hard Copy available at our cost of $23/713 Baht) One filter housing wrench for filter element replacement One container of high-pressure pump oil 2.5 pounds of pickling reagent One hand-held TDS meter for checking water quality (not included with control panel mount TDS meter) A baggy of assorted push-to-connect fittings to aid in installation
What we Don’t Provide. In other words, what you will need to supply: In summary:
Raw water through hull and shutoff valve
Raw water sea strainer (we recommend one these are shown in the pictures area)
Electrical installation wire and breakers for the AC and DC Pumps Mounting screws and bolts for the individual system modules
Zip ties and mounting straps for securing the electrical and water lines That’s it! Everything else we provide with the with the water maker.
Water Maker Module Sizes: Please see the pictures for the Units Size
Please notify us if you plan a 220VAC installation so we can change the standard 120VAC electrical switch for the high-pressure pump motor in your remote panel.
Please notify us if you plan a 24VDC installation so we can change the standard 12VDC electrical switch for your boost pump in your remote panel.
Standard Boost pump is a 12VDC self-priming pump.
A 120VAC Boost pump option available using 1.5Amp $200/6200 Baht Adder
A 24VDC Boost pump is available using 6.5Amp $200/6200 Baht Adder
The unit will be sent directly from the supplier and all shipping costs are extra